Single cable for MINI VCI FOR TOYOTA is cost-effective, the price of product is only one-third of similar foreign products.
Single Cable for MINI VCI FOR TOYOTA TIS
This package do not contain Toyota 22pin connector, so it can only do Toyota 16pin cars.
Hardware Version: V2.0.4 Software Version: V12.20.024
if you would want to reset immo, or make customization to cars, need at least 2.0.1 FW,with 2.0.1 FW there is change in PCB, as it support VPW, and has extra security chip on the other hand, all these simple clones with 1.4.1 FW support only CAN and K line VPW protocol is unsupported in 1.4.1 FW, and there is no parts for it on PCB
Support Toyota TIS OEM diagnostic software
High performance with ARM cpu inside.
High reliability of products using SMD chip, and certified by CE and FCC.
Support all the diagnostic communication protocols needed for Toyota (since 1996).
2. Supported Protocols
K-Line ISO 9141/KWP 2000 ISO 14230-4/SAE J1850 PWM/SAE J1850 VPW/CAN 2.0B ISO 11898 /CAN ISO 15765-4
Toyota MINI VCI PCB Board:
1pc x MINI VCI 16Pin Cable
1pc x CD Driver
Q:What’s the difference between SV46 with SP61?
A: SV46 does not include Toyota 22PIN cable, only have Toyota 16pin cable.SP61
have include Toyota 22PIN.
Scan obd16shop QRcode, convinent and faster
Any problems, please feel free to contact us.
Kindly Note: pls leave your telephone number for shipping arrival when you make payment for this product on our website and make sure that your paypal shiping address is the same with the address you want us to sent.Before signing,pls confirm everything is good.
How to buy on OBD16Shop.com
Installation Instructions For Mini VCI:
Please make sure your windows system is 32bit(Windows xp or 7), the 64bit system may cause problems.
Step1. install "TIS_Techstream_Setup.exe"
Step2. After the installation, don't run the software Techstream
2.1 Install "MVCI Driver for TOYOTA.msi"
2.2 run the "TISKEY.exe" in CD to Active the software automatically, the Icon "VCXConnect" on desktop is no use, you can delete
Step3. Run the "Techstream" on desktop
3.1 Select the area as "Europe"
3.2 Select the language you want
3.3 The register information, you can write everything you want, fill all the blank, then OK
Step4. Interface Select
4.1 Click the [Setup] menu, then click the [VIM Select], then select the [Xhorse-MVCI] in the drop down list of "Interface Setup", then Click [OK]