OPCOM OP-COM V2010 CAN OBD2 Diagnosis for OPEL
Make:Covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.Description
1.OPCOM V2010 OPEL covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2.The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, and Body Control Unit, just to name a few examples.
3.Since Opel is used many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.PIN3,PIN7,PIN8=Serial Link (ISO9141, KW81, KW82, KWP2000)
You will get a feedback on the state of the activated output. This will helps you to find the failed components more easily.
Fault codes will be shown with all available information
1.Full fault code text description and Full status information (Present, Not present, Intermittent)
- You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
The program shows you measuring block information on many control modules; you can choose anything from the list on your own.
- The program is capable of showing 8 measuring block parameter at same time. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec,or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast.
2.You can also run output tests on many controllers
- HSCAN-Dual-wire, High Speed CAN-BUS,500 kbps
- MSCAN-Dual-wire, Medium Speed CAN-BUS,95 kbps
- SWCAN-Single-wire, Low Speed CAN-BUS,33.3 kbps
3.You can learn keys to immobiliser,and remote keys to the central door locking.
4.You can also reset, and program the following immobilizer related items: ECM, BCM, and IPC.
5.You will need the vehicle security code, which can be found on the CAR-PASS.
6.You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva
7.You can code SAB6, and SAB8 airbags with the software.
8.The diagnostic interface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters.
9.The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps.This is the main reason, why only the USB port based interface is available for CAN-BUS.
10.Compared to the TECH2, which is the dealer’s tool (with a 32 MB Card+CANdi interface); the price of OP-COM is quite affordable.
3.Software and Drivers CD
Q: Does this product have any other language other than English?
A: OPCOM V2010 has English and German version.
Q: How to update the software for op-com?
A: if you buy the old op-com 2008 from our company before, now we have opcom 2009. If you want to update, pls let us know, we will send the new software version to you for updating. You just install the new software on your computer.
If your opcom 2010 was not bought from us, if you use our software to update, it may cause your product destroyed. So pls be careful to use, customers should confirm that you bought the op-com from us.
Q:I have problem in installation for OPCOM,can you help me?
A:Hi,friend,you can download the opcom installation from this page.If it is not working for you,you can contact us.
OPCOM Circuit Board:
Any problems, please feel free to contact us.
Kindly Note: pls leave your telephone number for shipping arrival when you make payment for this product on our website and make sure that your paypal shiping address is the same with the address you want us to sent.Before signing,pls confirm everything is good.
How to buy on OBD16Shop.com
OPCOM 2009V Technical service
Q: Does this product have any other language except English?
A: OP COM V2009 now has english and germany.
Q: How to update the software for op-com?
A: if you buy the old op-com 2008 from our company before, now we have opcom 2010.08 versions, it is the latest software.if you want to update, pls let us know, we will send the new software version to you for updating.you just install the new software on your computer.
If your opcom 2008 was not bought from us, if you use our software to update, it may cause your product destroyed.so pls be careful to use, customers should confirm that you bought the op-com from us.
Q: Does opcom 2009 need activation code?
A: OP COM 2009 doesn't need activation code. When you install the software, if ask you to input the activation key, it means you don't operate it correctly. If you encounter this problem, please check the installation guide on our website, if still don't know how to fix it, feel free to contact us with our customer service.
Be sure to install the software on the computer with Windows XP system.
Be sure to close the Anti-virus software on your computer. Because the Anti-virus may recognise it as a type of virus, it will clear off all the software on the CD.