Newest version V4.88 digiprog3 newly released, v4.88 digiprog 3 add more car models on the basic of V4.82. Digiprog3 is a cost-effective mileage correction tool, it support multi-language and full range or vehicle.
V4.88 Digiprog III Digiprog3 Odometer Master Programmer Entire Kit Newest
Power-On Password: 1
Software Version: V4.88
Languages: Deutsch, English, Espanol, French, Portuguese, Italiano, Turkey, Nederlands.
Please Kindly Note
You can not do below steps or will lead to blue screen
1. Update the device
2. Connect the device with computer
Digiprog is the worldwide leader in the production and marketing of digital speedo programming and correction software. Our state of the art techniques are continuously kept up to date and our quality standards are second to none, experts in vehicle techniques, EDP machine control as well as our measurement technology has years of experience in the field of digital vehicle engineering and constantly strive to stay ahead of the competition in there field of expertise.
V4.88 Version Newly added Vehicles
Citroen: C3/DS3 new versions
Dodge: Charger 24C16
VW: Diag new version
Crafter/Sprinter EZS new versions
Lancer new version
Qashqai 2011 HCS12
Digiprog 3 Menu
1. EEPROM menu
The first option on the main menu is the Eeprom menu. Reading, writing and saving Eeprom information is all done using this menu. A more detailed guide to using this menu follows later on in the introduction.
2. CAR/TRUCK Menu
This is the menu you will use for correcting and reprogramming vehicles. Manufacturers are set out in alphabetical order and models of vehicles are set out in a simple sub-menu format.
3. Motorcycle Menu
This menu is the same as the CAR/TRUCK menu but is used for reprogramming motorcycles.
4. Special Functions Menu
The special functions menu is for use only by official DigiProg dealers.
5. Setup Menu
This menu is where settings on your DigiProg can be changed. Language, password, brightness, volume, and the time/date can all be set and changed in this menu. You can also change whether your machine is working in kilometres or miles.
Using the EEPROM menu
On some of the vehicles you will come across, an eight pin Eeprom chip will be used to store the vehicle data. These chips hold vital information from the vehicle such asignition and immobiliser codes. Loss of this information could result in anything from minor faults, to major faults involving the vehicle not starting and having to be taken to the main dealer. This is why it is very important to read and save the original information from the Eeprom before programming, this way if any errors do occur you can always return to the point you started.
The process of reading and saving this information is very simple. The Eeprom chip itself will have a mask number printed across the top of it, for example a widely used chip is a 93C46. You can connect the chip to your DigiProg by using adaptor ST01 or ST04. Most chips are surface mount eeproms which will use ST01, but the larger DIL chips will use ST04.
Finally some important tips for using Digiprog 3
Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).
Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
Always keep your DigiProg in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers’ from Eeprom’s ensure that they are cleaned completely as the solvent can damage the clips.
Service interval adjustments and settings
Fault memory read-erase
Integrated PC communication
1pc x Digiprog3 Main Unit
1pc x OBD2 Cable
1set x Cables and Adapters
Q1: Does digiprog III can change mileage for AUDI A5 2013?
A1: It may not do.
Q2: Can this one do car 2012 and car 2014?
A2: It can support some of them.
Q3: After I enter the password, the screen is still like this, why?
A3: 1) you password is wrong.
2) Your password is right, but you click X.
Q4: Can it support VW, golf VI, 1.4 FSI?
A4: In theory, it almost can support all cars before 2012.
Q5: Can I change odometer from 100,000 km to 70,000 km?
A5: If you car is in the supported car list, then it can.
Q6: Can it support 2008 Audi A8 4.2 tdi?
A6: Yes, it can.
Q7: Can it change the mileage of 2005 Audi A3?
A7: In theory, it can.
Q8: Can Digiprog III do Nissan Diesel 2007?
A8: No, it can not.
Q9: Can it do diesel cars?
Q9: It determined by the car models.
Q10: Can digiprog iii do the Benz car 2011?
Q10: It can support some of them.
Q11: Why digiprog3 v4.85 can read mileage of Mercedes e class w212, but can not change it?
A11: If you do as the tips of the device and connect it rightly, it still can only read mileage and can not change it, and then the device does not support the car.
Skype: eobd11 , obd16com
Scan obd16shop QRcode, convinent and faster
Any problems, please feel free to contact us.
Kindly Note: pls leave your telephone number for shipping arrival when you make payment for this product on our website and make sure that your paypal shiping address is the same with the address you want us to sent.Before signing,pls confirm everything is good.
How to buy on OBD16Shop.com