OBDSTAR X-100 PRO Auto key programmer (C+D) Type
1.With X-100 PRO, Without worries about Matching!
2.X100 PRO C+D Type function: Immobilizer remote match+ Odometer+ OBD Software
3.X-100 PRO Auto Key Programmer is a kind of handheld device for programming keys in immobilizer units on vehicles.
4.This scan tool has a simple and robust design, to make your vehicle service experience much easier!
Xhorse VVDI MB Tool is used for key reading and writing,EIS tools,password calculation,key file preparing,ESL tools,ECU/Gearbox renew and many special functions. It supports all key lost for W204, W207,W166, W246, W212, W212(old), some W216, W164 2009-, W210 (newly add) etc and free update online lifetime.
1.This OEM Tango key programmer contain full module, including all car software.
2.You can update the device on flyobd website.
3.Supported languages: English.
4.Support to cover, read, write and generate the latest transponders used in the latest vehicle immobilizer technologies
1. Support programming both Toyo-ta G and Toyo-ta H chip vehicle via OBD2 port.
2.Apply to 4D67,68,72(G), support both G and H chip, test on 2015 Camry
Original Mercedes Benz NEC PRO57 Key Programmer
1.The most powerful Benz key programmer on the world that support NEC.
2.No need disassemble, support read EIS data via IR, support add smart keys.
3.Many more functions is included only in NEC PRO57.
4.NEC PROG57 Language: English
5. Support All Key Lost, support Keyless GO.
Toyota G chips Cloner box use for CN900
DAT17 Key Matching Auxiliary Clamp for Subaru
Toyota G Chips Cloner Box Use for ND900
Xhorse VVDI RKE BOX is applied at the following aspects:
1. To change the original straight remote control to folding remote
2. No method or apparatus temporarily to add a new remote control
3. Temporary replacement because of the original out of stock
4. Only one remote for the original car (such as the Chinese, Besturn, etc.)
5. To seek low-cost remote control instead of the expensive original one
Note: at least one original remote control for use of the kit
Hand-Held NSPC001 Automatic Pin Code Reader for Nissan Support New 20 Digit
1.Support all Nissan cars that can read BCM code to calculate pin code.
2.Hand-held, no need install software, can directly use, more convenient.
3.Can transfer 5-digit code to 4-digit code, the newest 20-digit code to 20-digit code.
1. Work with the immobilizer system of CV7, CV, Zhixiang Delphi and CX30 Delphi
2. Work with the integrated body systems of Changan Yuexiang V and EADO, support: program remote, erase remote, live data.
3. Work with new S30 immobilizer system 2, support: read version information, read and clear fault codes, read data steam, match new system,program keys and ecu
Handy-Baby Car Key Copy Key Programmer for 4D/46/48 Chips
1.Specially for 4D/46/48 Chips copy
2.Hand-held device, easy for operation, replacement for 468 KEY PRO III
3.Support 8C copy by JMD handy baby use TK5561A chip! so easy and so quickly! use TK5561A blank chip !!
4.JMD Handy Baby 96 bit 48 online copy!! if you have assistant for free ! if no you need token!!each time decoding need token!!
V50.01 CK-200 CK200 Auto Key Programmer Newest Generation
1.Updated version of CK-100 Key programmer
2.Latest software version: V50.01
3.New generation Car Locksmith Tools
4.Support multi-brands car models key programming as well as Toyota G chip
Add more car models in CK-200 Auto key programmer
New Arrival Transponder PRO Key Copier
1.With USB port 9-PIN serial adapter for connection with computer
2.Automatically identify chip ID number and read out the data of different chips.
3.Can perform encrypt for T5 keys and prevent from copied
4.Support 11, 13, 33, 53, 73, 93, and 4C keys