PCMtuner tool can read and write ECU data through OBD, BENCH, and BOOT modes. PCMtuner performs a complete backup of ECU data, easy ECUs clones, and power upgrades. It can also support read and write gearboxes. According to the data readout via PCMtuner tool, our engineers can provide customers stage1 stage2 stage3, pop bangs, gearbox data to adjust LC, sports display, IMMO off, AdBlue off, DPF off, DTC off, Vmax, swirl off, restoring ECU, or TCU factory setting service (paid service).
No Token, No Annual fee, No subscription.
Have all GM protocols, OBD read ECM and TCM. All work in OBD, no need damaos for GM cars.
With VCM Suite for the most comprehensive scanning, logging and calibration tools on the market.
XPROG-M V6.12 ECU Programmer With USB Dongle, No need activation.
With new authorization: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9.
Supports BMW EDC16 EDC17 MED17 ECUs
Supports MG1 MD1, VAG/Volvo MED9 ECUs
Flash checksums are included.
Supports connection by Bench, Boot, OBD for more than 98% of ECUs.
No need to open the shell and punch holes to protect the original car.
Kess V5.017 EU Version with Red PCB Online Version Support 140 Protocol No Token Limited Plus KTAG V7.020 Red PCB Firmware K-TAG 7.020 Master Software V2.23 EU Online Version No Tokens Limitation
[2022 Full Chip Version] Tactrix Openport 2.0+ECUFLASH ECU Flash Cable J2534 for Toyota Ford Mazda JLR Subaru Mitsubishi Supports WIN10
This is bundle deal for Iprog+, Probes Adapters, IPROG Plus PCF79xx SD-Card Adapter and Universal RDIF Adapter
Complete Package to make your job much easier!
FC200 ecu programmer is new device which is designed for ECU/EGS clone, supports functions including data reading and writing, ISN acquisition, disassembly matching, module clone, VIN modification and DTC shielding ect FC200 supports 4200 kinds of ECU, 3 tyeps of operation modes, and covers 80% of the models at the market.
The package includes PCMTuner ecu chip tuning tool and Kess v2 firmware 5.017 ksuite 2.80 red pcb online version and Ktag firmware 7.020 software 2.25 with red pcb, buy them together and you can save a lot, money! W offer you a lifetime customer service and tech support. SF347 Full Protocol OBD2 Jumper Cable as Gift
Probes Adapters for Iprog+ Pro or Xprog Programmer in-circuit, which can make your work much easier without soldering.
Orange 5 is a professional programming device for memory and micro controllers. Unique feature of the current series programmers is built-in macro language for writing down protocols, which gives fast and easy capability to add new types of micro schemes, precisely meeting manufacturers' requirements to read/write algorithms.
CG Pro 9S12 new product, the next generation of CG-100, can perform automatic conversion BMW, Mercedes-Benz kilometer and BMW key matching. It combines both CGDI Pro BMW MSV80 key programmer and CGDI Pro Mercedes key programmer. In another word, it is cgdi100-cgdi mb- cgdi bmw. 3in one cgdi pro.
EU Version Red PCB New 4LED KTAG 7.020 Firmware Latest V2.25 No Token Limited Multi-Language
The USB V-CAN3 supports some J2534 protocols and can be used as a J2534
Software such as PCM-FLASH and Forscan have been tested to work with USB V-CAN3 devices.
EOBD2 FLASHER 1260 is an easy hardware for auto chip tunning. FLASHER Galletto 1260 is working on EDC16,EDC15, MEx.x ,DELCO and many more engine4s ecu. Galletto 1260 is compatible with the newest modern diesel TDi, HDi, JTD, and petrol cars.
No PCB in this package! LED works for 12V. After you connect with the probe, disconnect 12V battery for LED,it will works.The probe pin is adjustable.
EU Version Red PCB New 4LED KTAG 7.020 Firmware Latest V2.23 No Token Limited Multi-Language K TAG 7.020 Online Version No Tokens limit.
Kess V2 Master V5.017 Online Version Support 140 Protocol No Token Limitation. Read and write ECU via OBD2 port directly, no need disassemble ECU from the car, easy to use .