[EU/UK/US Ship] 2023 FoxFlash Super strong ECU TCU Clone and Chiptuning tool Free Update with Free Damos Support VR Reading and Auto Checksum

2023 FoxFlash Super Strong ECU TCU Clone and Chip Tuning tool Free Update Support VR Reading and Auto Checksum

Product Introduction:
 
foxFlash® is a new, unique and revolutionary tool with 2-year warranty for automotive professionals, tuners and engine calibration engineers. However, the foxFlash® is so much more than just an ECU programming tool, it is also a perfect flashtool for reading/writing operations. 
FoxFlash is a powerful solution developed for professional chiptuners, calibration engineers and control unit (ECU and TCU) repair shops. foxFlash includes multi-method control unit programming for tuning ability. Designed by tuners, so you can get many of their support.

What is the features for foxflash?
 

• Master version
• Auto checksum
• Special functions
• Two Years Warranty.
• Full protocols open
• Help desk and tuner account
• ECU and TCU connect wires with pdf
• Auto support eeprom and flash checksum 
• Free update. No subscription, no annual fee. 
• Software can be download on official website: https://www.dfb-technology.com/
• Multi-language:Italiano, English, Deutsch, Francais, Espanol, Polish, Portugues, Czech, Romana, Turkish.
• Professional Online support, Faster server 1000M/S, No VPN needed. Supports WiFi hotspot 
• VR read online work (some ecu need use our VR system, tool auto connect to ousr server donload file )
• ECU can be restored to original if your ecu was damage or meet some bad tuning, use our tool can restore to original.
• With the Latest firmware and updates. Use better quality BOM and PCB. More stable, full proof, and reliable. 
• Support MEDC17 free clone service (most of others tool need patch the files after read out ,but ours is free)

Note:

• Foxflash Manager app can ONLY be installed on up to 6 PCs
• Send email to info@dfb-technology.com to create an account to download damos files
• FoxFlash ECU TCU Car List, or check driver list on dfb-technology, it is much easier to search than pdf
• Compatible Operating Systems: Windows 7, 8/8.1, 10, 11 64 bits Pro, Recommended Configuration: CPU > 2.5 GHz (Intel i5, i7), RAM > 4GB (32 Bit is not supported)

 
Support Five Modes and Full System
 
1: OBD mode：(read the data from Diagnostic port, you need remove the ecu or tcu from car or open the ecu box, just read everything from car, we also support obd reading, we supply original file from our server, you can read it via obd reading. )
2: BENCH mode: we also call it service mode,  you can use this mode clone or backup all ecu data, read the internal flash and external flash and eeprom data, so you can save a lot of money for clone ecu and tcu , you also can clone tcu and chiptuning with this mode.
3: Jtag mode: open the ecu, and wire it or use ours adapter to connect ecu ways,some of denso ecu always need use this mode for reading and writing .
4: Boot mode: open the ecu and always can backup everything, read the flash and eeprom, you can save some ecu cause your obd write failed, or some others reason cause the ecu dead.
5: Full system: you can read and write by pinout for most of ecu and tcu.
6: BDM mode: some of the ecu need read and write in bdm mode, open the ecu and use ours adapter to connect it.






Support Multi-language

foxFlash supports multi-language: Italiano, English, Deutsch, Francais, Espanol, Polish, Portugues, Czech, Romana, Turkish.





Support Winols damaos
 
As we all know, winols damaos and A2L is very expensive ,we supply these to ours customer for free, so you can get it for chitpuning, dtc off, and so on.
 
Supported Control Units
We believe a control units list can be considered as a more safe approach to correctly target the overall tuning procedure due to the fact that a lot of brands offer identical car models & versions that share different Control Unit types.
 
Please note that foxFlash can help you select the right protocol with its auto-detection feature when identifying on most control units.
Support Vehicle Types: 

1. AUTO
2. CAMION
3. TRATTORI
4. MOTO
5. MARINE
6. BIKE
7. CAMBI AUTOMATICI

 
Product Functions:
 
ECU clone 
TCU clone
Chiptuning
Stage1-stage4
Vmax off
Adblue and SCR off
DPF  OFF
Flaps OFF
popbangs 
gearbox data to adjust LC
sport display
immo off
dpf off
dtc off
GPF/OPF Removal
DPF Removal
EGR Removal
DTC Removal
ADBlue Removal
HOT Start Fix
IMMO Removal
Readiness Calibration
Flaps / Swirl Removal
TVA Removal
Sport Displays Calibration
Cold Start Noise Reduction
Kickdown Deactivation
StartStop Disable
MAF Removal
Speed Limiter Removal
Torque Monitoring Disable
Burbles Activation
Popcorn Activation
EVAP Removal
Exhaust Flap Removal
SAP Removal
AGS Removal
BMS/BPCM
Lambda/O2 Removal
Launch Control
OBD Reading Protection
Boost Sensor Calibration
LC, AL and NLS for MED9.1
Checksum Fix
vmax, swirl off
restoring ECU or TCU factory setting service 
VIN fix (EEPROM support checksum, so you can easily change VIN then write back )


BENCH MODE for complete reading and writing (full backup) TRW EMS2.2 and TRW EMS2.3

FULL READ AND WRITE VIA PINOUT IN BENCH MODE:

• BOSCH EDC7  
• BOSCH EDC16
• BOSCH ME9 / MED9

FULL READ AND WRITE VIA PINOUT IN BENCH MODE:

• BOSCH MD1
• BOSCH MG1

- FREESCALE SPC5777
- AURIX TC29x
- ST SPC58

FULL READ AND WRITE VIA PINOUT IN BENCH MODE:

• BOSCH EDC17
• BOSCH MED17 / ME17
• SIEMENS PCR2.1
  (Unlocking also possible via pinout)

FULL SYSTEM VIA PINOUT (MICRO/FLASH + EEPROM) OF ECUs:

• BOSCH
• CONTINENTAL
• DELCO
• DENSO
• MARELLI
• SIEMENS
• TEMIC

BDM E JTAG MODES FOR:

• BDM MPC 55x
• BDM MPC 56x
• BDM MC32 / ZC32
• BDM HC12 / S12x
   
• JTAG NEXUS MPC/SPC 56xx
   
• JTAG NEXUS MPC 55xx
   
• JTAG RENESAS
  SH7055
  SH7058
  SH7059
  SH7251
  SH72543
  SH72544
   
• JTAG NEC 76F00xx

    76F0038AGD

     76F0038GD
    76F0039AGD
    76F0039GD
    76F0040GD
    76F0070
    76F0085

BOOT MODES:


- BOOT MODE C167 29Fxxx
- BOOT MODE ST K-LINE / RX-TX / CAN
  ST10F168
  ST10F269
  ST10F273
  ST10F275
  ST10F276
  ST10F280
  ST10F296
 
 - BOOT MODE Tricore for micro
  TC1724
  TC1728
 TC1738
  TC1762
  TC1766
  TC1767
  TC1782
  TC1791
  TC1792
  TC1793
  TC1796
  TC1797  
 
- BOOT MODE Renesas
 SH7052
 SH7054
 SH7055
 SH7058
 SH7059
 SH7251
 SH72543
 SH72544


- BOOT MODE Mitsubishi
 MH7202
 MH7203
 MH8102F
 MH8105F
 MH8106F
MH8202
 MH8206F
 MH8301F
 MH8304F
 MH8405F
 
- BOOT BAM SYSTEM MOTOROLA
 SPC5674
 SPC5777

- BOOT MODE Fujitsu
- BOOT MODE Hitachi

ADDITIONAL PACKAGE FOR AUTOMATIC TRANSMISSION:

• FULL READ AND WRITE TCU (MICRO+EEPROM)
• TCU CLONING
• TCU CODING FUNCTIONS

Multiple connection possibilities:

CONNECTION VIA OBD                                                                              BENCH MODE ECU BOSCH MD1 - MG1


BENCH MODE EDC17 / MED17                                                                                 BENCH MODE SIMOS


BENCH MODE EDC16 / ME9 / EDC7                                                                      BENCH MODE DENSO MICRO RENESAS


EXAMPLES OF CONNECTION IN FULL SYSTEM
BOSCH / DELCO / DELPHI / DENSO / MARELLI / SIEMENS / CONTINENTAL / TEMIC



BDM CONNECTION                                                                                                BOOT MODE CONNECTION

  
JTAG CONNECTION                                                                                                BENCH CONNECTION WITH AUTOMATIC GEARBOX

 
Compatible Operating Systems:
 
Windows 7
Windows 8/8.1
Windows 10
Windows 11
 
Recommended Configuration:
 
CPU > 2.5 GHz (Intel i5, i7)
RAM > 4GB
64 bits
 

Package Includes:
 
Hardware:
 
1pc x Master machine 
1pc x Fox bench box
1pc x USB cable 
1pc x Power adapter
1pc x Fox box store over 10 adpaters 
1pc x Jtag and bdm cables
1pc x Pen 
1pc x Notebook
1pc x Suitcase
1pc x Function cable for boot, bench, kline links .
1pc x Truck OBD cable
1pc x Car OBD cable
1pc x Paper box 
1pc x Install guide 
 
Software:
 
1pc x  Main software
1pc x  Technical Support
1pc x  Login account for software and tools
1pc x  PDF pacakges for connecting ecu and tcu
1pc x Join facebook group for support 
1pc x Online chat support for use
 
Extra pacakge according to users request after the user get the tool.
 
1pc x Tuner account
1pc x Helpdesk
1pc x WinOLS damaos, A2L